Send Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
SMC connectors compact and reliable with high signal integrity SMC connectors (Small Multiple Connector) have a grid of 1.27 millimeters and are available with pin counts of 12 to 80. Reliable and compact connections can be made with them. Various shapes, such as straight or angled male and female terminal strips, enable different mating configurations. The combination of different height male and female terminal strips results in diverse board-to-board spacing. The SMC connector also supports wire-to-board solutions
Product Catogory: Input/Output Connector丨SCSI Connector丨D-SUB Connector丨 IEE1394丨USB Interfaces丨 Modular Jack丨Edge Card Slot Connector丨Serial ATA Connector丨 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon/ PCB D-Sub Connectors Product specification 1. El ectri cal Characteristics: 1.1 Contact Current Rate: 1 AMP 1.2 Insul ati on Resi sitance: 500MQ Mi ni mum 1.3 Cont act Resi s tance: 25MQ Maxi mum 1.3 Cont act Resi s tance: 25MQ Maxi mum 2. Material: 2.1 Insul ator:...
2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT+30%GF UL 94V-0 Number 2 No. of...
Latch Eject Header丨1.27mm Latch Eject Header丨2.0mm Latch Eject Header丨2.54mm Latch Eject Header丨 2.54mm(0.100”) Pitch Male Ejector Header Header DIP 90° Double Row With Special Short Latch Product specification Current Rating: 3.0Amp Voltage Rating: 350V Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 1000V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Latch Material: Zinc Alloy Latch plating:...
Connector Category: Box Header丨1.27mm Box Header丨 2.0mm Box Header丨 2.54mm Box Header 1.27mm Box Header 90° H=5.70 Current Rating: 1Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL 94V-0 Length: 46.2mm Width: 8.1mm Height: 8.05mm Number 2 No. of contacts: 6, 8, 10, 14, 16, 20, 24, 26, 30, 32, 34, 40, 44, 50, 60, 64,...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1) Product Specification Connector Category:IDC Connector丨 Stanard IDC Connector丨 Red IDC Connector丨 White IDC Connector丨Dip Plug Connector丨 Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20mΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PBT+30%GF UL 94V-0 Length: 24.765mm Width:...
IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the conductors of insulation before connecting. When properly made, the connector blade cold-welds to the conductor, making a theoretically reliable...
IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the conductors of insulation before connecting. When properly made, the connector blade cold-welds to the conductor, making a theoretically reliable...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
Structure of Box header usually consists of a square plastic enclosure and a number of neatly arranged square rows of needles. According to the requirements, the peripheral dimensions of the box header include 1.27 spacing, 2.0 spacing and 2.54 spacing; According to the different spacing, the diameter of the square row of needles used will be changed accordingly. The contact surface of the bottom PCB can be designed as SMT patch type or DIP directly inserted 180 degrees. Connector Category: Box...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
Connector Category: Box Header丨1.27mm Box Header丨 2.0mm Box Header丨 2.54mm Box Header SPECIFICATION Current Rating: 1Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL 94V-0 Number 2 No. of contacts: 50P, we also have 06, 08, 10, 14, 16, 20, 24, 26, 30, 32, 34, 40, 44, 60, 64, 80, 100P, when you place order on us, please...
Connector Category: Box Header丨1.27mm Box Header丨 2.0mm Box Header丨 2.54mm Box Header 1.27mm Pitch Straight Type Box Header Connector SPECIFICATION Current Rating: 1Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max Withstand Voltage: 500V AC/DC Operating Temperature: -40°C to +105°C Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL 94V-0 Number 2 No. of contacts: 20P, we also have 06, 08, 10, 14, 16, 24, 26, 30, 32, 34, 40, 44, 50, 60,...
Connector Category: Box Header丨1.27mm Box Header丨 2.0mm Box Header丨 2.54mm Box Header 1.27mm(.050") Box Header 180°/Straight H=5.4mm SPECIFICATION Current Rating: 1Amp Insulation Resistance: 1000MΩmin Contact Resistance: 20MΩmax Withstand Voltage 500V AC/DC Contact Material: Brass Contact Plating: Au or Sn Over Ni Insulator Material: PA6T+30%GF UL 94V-0 Operating Temperature: -40°C to +105°C Color Insulator B: Black U: Blue W: White Available for Poles at Present: 4P, 10P, 12P, 20P, 22P, 24P,...
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row...
DIN 41612 / IEC 60603-2 Connector The DIN-41612/IEC-60603-2 family of connectors consists of 13 different basic shapes. The connectors are suitable for printed circuit boards and the transmission of electrical signals with frequencies up to three...
FAQ: Questions and answers regarding DIN 41612 / IEC 60603-2 How are DIN connectors processed? With termination technology, press-fit or soldering technology as well as through-hole technology, a FASTON connection, or insulation displacement...
Is DB9 and VGA the same? The VGA connector can use a classic DB9 connector or (more commonly today) a DB15 style connector. ... The VGA connector (15 pin) is still widely used and while it was originally used to carry a 640 x 480 pixel format it is...
DIN 41612 Connectors/ DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to...
Related Products List
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.