Send Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for 2 54mm Male Headers)
Right Angle 20 Pin Headers DIN 41612/IEC 60603-2 Connectors
DIN 41612 Connectors Introduction DIN 41612 Connectors are widely used in rack-based electrical systems. The standard performance of these connectors is a 2 A per pin current carrying capacity and 500 V working voltage. Both figures may be variable due to safety and environmental conditions. DIN 41612 / IEC 60603-2...
128 Pin Vertical Male Type C Eurocard DIN41612 Connectors
Product introduction The connectors have contacts arranged in rows, typically one two or three, with two and three being the most common. These rows are labelled, a, b, and c, for example a pin may be numbered 21a, or 22b, etc., dependent upon the position and the row. Typically the rows have 16 or 32 contacts per row...
DIN41612 Type 0.33Q Connectors-Inversed 10 Positions
DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features
Various termination...
DIN 41612 / IEC 60603-2 Connectors Vertical Plug Inversed 16P
DIN 41612 / IEC 60603-2 Connector Product introduction The variety of different types and termination technologies (press-fit, dip soldering, manual soldering, wrapping, crimping, THR) for DIN connectors cover a wide range of applications. Eurocard Connectors per DIN 41612 and IEC 60603-2 Features
Various termination...
1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon
Product Catogory: Input/Output Connector丨SCSI Connector丨D-SUB Connector丨 IEE1394丨USB Interfaces丨 Modular Jack丨Edge Card Slot Connector丨Serial ATA Connector丨 1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon/ PCB D-Sub Connectors Product specification 1. El ectri cal Characteristics: 1.1 Contact...
2.54mm Ejector/Latch Header Connectors 90° Double Layer
2.54mm Pitch Double Layer DIP 90° Ejector/Latch Header Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20MΩ max
Withstand...
2.54mm Ejector Header Solder Angle Through Hole with Lever
0.100" (2.54mm) Ejector Header Solder Angle Through Hole with Lever Product specification Connector Category: Latch Eject Header丨1.27mm(.050") Latch Eject Header丨2.00mm(.079") Latch Eject Header丨2.54mm (0.100")Pitch Latch Eject Header丨 Current Rating: 3.0Amp
Insulation Resistance: 1000MΩ min
Contact Resistance: 20MΩ...
2.0mm Single Row Staright Female Pin Header Connectors
2.0mm Pitch single row DIP straight Female header Product specification Connector Category: Female Header丨0.8mm Female Header丨1.0mm Female Header丨1.27mm Female Header丨1.5mm Female Header丨20.mm Female Header丨2.2mm Female Header丨2.54mm Female Header丨3.0mm Female Header丨3.96mm Female Header丨4.2mm FemaleHeader丨5.08mm...
1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1)
1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1) Product Specification Connector Category:IDC Connector丨 Stanard IDC Connector丨 Red IDC Connector丨 White IDC Connector丨Dip Plug Connector丨 Current Rating: 1.0Amp Insulation Resistance: 1000MΩ min Contact Resistance: 20mΩ max Withstand...
1.27mm IDC Flat Cable Header DIP plug Connector(terminated height 7.0)
IDC Connectors Introduction An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation,...
1.27mm(.050") Pitch Dual Row Box Header 180° H=4.90
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...
1.27 mm Pitch Box Shrounded Headers SMT type H=5.70 with Housing
Box Shrouded Header Introduction Box Header is usually called: which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Related Products List
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.